Whether you are a professional roofing contractor or a client looking to hire a team of professionals, you may have heard of the tragic and even fatal falls from heights while work is on progress.
Working at heights is fraught with danger. The solution lies in ensuring that you have installed a roof anchor for the safety of the workers and to prevent fall mortalities.
Most people are not aware that both permanent or temporary roof anchor systems are required for long or short-term jobs at heights. Thus, whether one needs some workers to install their solar panels or for chimney sweeps or for paint works, they will need protection if the height is over 10 feet. Fall protection is often neglected as most people are either not aware or find it difficult and inconvenient.
As a business owner, one must ensure a safe working environment for their workers. You will be held criminally liable if it is found that the safety systems for your workers are unsatisfactory and noncompliant. Therefore, one must understand the significance of fall protection anchor points and use them effectively.
What is a Roof Anchor Point?
The roof anchor points are used along with other height safety equipment. There are permanent and temporary anchor points available, and it is essential to pick the right anchor points and to install them correctly so as to protect the workers from any fall hazards. Unfortunately, not all the anchor points are of the same quality or designed for optimum protection. Hence, one must make careful and informed choices when looking for commercial or residential roof anchor points.
When considering an anchor point selection, it is essential to know the kind of forces they should withstand and what kind of anchor points can be safely connected to the lanyard. Other aspects to keep in mind include the type of work or project to be carried out and where in the roof, one would need to attach the anchor points.
Roof safety anchors are based on two primary systems, fall arrest system and rope access system.
- The fall arrest system is designed to protect the workers when they work through a free-fall through space, and as the system arrests them in mid-air, it protects them from an impact at a lower level.
- The rope access system is meant for fall protection and works where the conventional methods won’t work at heights. The system allows the workers to descend, ascend, and traverse ropes as they work while suspended by a harness.
According to the basics of any fall protection, it should have permanent or temporary roof safety anchors, a connecting device, and body support. Contrary to popular belief, it is not essential to have the anchor point placed above the work location as the users can create an anchor point on the side of the sloping roof.
It is essential to hire a team of expert technicians who can offer you the right guidance, whether one is looking for temporary or permanent roof anchor points. They will not only help with the selection but will also keep the safety and compliance needs of the task. The technicians should adhere to the applicable standards and be an expert with how to improvise and create an anchor point for 100% safety. There are different anchor points available in the market that is suitable for different types of heights, roofs, and the project. Use only the best quality and security procedures for best results and optimum safety.
0 comments:
Post a Comment