Everything You Need to Know About Cable Handling Equipment and Cable Glands

Handling cables is a hard task. There are so many things that you need to keep in mind and so much that you need to understand before you start to make use of them. With many types of equipment that you could use, the combination of cable handling equipment and cable glands can be tricky to get.

This article talks about how to make use of the combination without much troubles.

What are cable glands?

To understand how the cable handling equipment and cable glands work, you first need to understand what cable glands are. To put it simply, these can be defined as “mechanical cable entry devices,” which means they will be used during the conjunction of the cable and the wiring of the electricals.

Here are some areas where these cable glands can be used:

• Automation,
• instrumentation and
• Control.

The functions of Cable Glands

If you wish to make use of cable handling equipment and cable glands, here are the functions you need to keep in mind:

• First of all, the cable glands are used to act for sealing and terminating the devices.
• In many devices, cable handling equipment and cable glands will help in providing the holding force to the electronic device.
• It helps in providing additional environmental sealing to the device.
• By sealing the electronic device, the cable glands eliminate the possibility of dust and moisture from getting inside.

What more do you need to know?

Wondering what more do you need to know about cable glands? Here is some more information:

• These can be made up of metallic or non-metallic materials.
• It can also be a combination of metallic and non-metallic materials.
• When used in explosive scenarios, these cable glands come with a seal of assuredness.

How else can the cable handling equipment be used?

Apart from making use of cable handling equipment and cable glands together, you can make use of the cable handling equipment with some other types of devices as well. Here are some more combinations that you can try out:

• Cable Drum Rotators:
  These are welded on one side and can be adjusted, which is why they can be used with the cable handling equipment. These steel drums help you to rotate the cables easily and weld them as per your choices.
• Cable Stockings:
  When you make use of cable handling equipment, you need to understand that effectiveness and efficiency is all that you need. Furthermore, if the environmental situations are adverse, then all you need to do is to get these cable stockings made of steel, which will provide you the much needed strength and durability.
• Conduit Rods:
  These rods offer a quick way of installing wires and cables. They are often glass-fiber-reinforced epoxy rods, which offer these rods greater elasticity. Because of their quality, the rods can be used for any type of duct installation.

With the above-mentioned points in mind, it is clear that the cable handling equipment and cable glands can be used in various forms and manner. However, the most enduring use of the handling equipment, as the name suggests, is that it helps in handling the wires and cables, which in turn helps in the proper installation of the same.

Furthermore, as per the requirement of the project, you will be able to deal with the load by changing up the combinations to be used with the cable handling equipment and cable glands, as mentioned above.