The importance of Fall Protection Systems

Construction workers face the most dangerous and hazardous struggles in the industry. Falling from height is one of the major causes of injury and death in construction industry. It may sometimes lead even to death, and it is important to have ample safety and precautionary measures. The fall protection systems must be looked into with details in order to avoid any kind of accidents that might occur. Apart from that, according to the safety regulations, you must install all fall protection systems in your construction sites to ensure the best safety to your workers.

Fall Protection Systems ensure Safety and Precautions

Every construction company must establish safety standards and some kind of fall protection system to ensure that the work is done smoothly without any kind of casualty. Residential construction, roofing, steel erection and even general commercial construction are also areas where workers are exposed to fall hazards on the site. A comprehensive plan must be constructed before the entire project begins as a strategy for fall prevention. The contractors and workers, especially those who have to work at heights, must be provided with safety gear, and the site must be equipped with equipment for fall protection.

Fall Protection

There are Seven Generalized Fall Protection Systems

1. PFAS or the system of Personal Fall-Arrest– Arresting a fall
2. System of Personal fall restraint- This prevents fall
3. System of Device Positioning– Limiting the fall to at least 2 feet
4. Guardrail system- This also prevents fall
5. Safety Net system- Arresting a fall

An additional rescue plan and drill must also be planned in advance as an accidental fall protection. Partnering up with companies that have the fall protection systems is a good way to start with. They not only install the fall protection in your construction sites, but they will also train your employees about fall protection systems.

There are several online courses that train the employees in recognizing the fall protection hazard. They also teach people to identify the situations under which the fall protection would be needed because it is important to learn the basics and prevent anything or anyone from falling. Swift decision making and protecting themselves along with any other person from falls is a very important factor.

Key Points for Fall Protection Systems

There are certain key points that must be integrated in fall protection systems.

1. Learning to recognize any kind of potentially fall hazards specially near unprotected edges
2. Remembering to operate and use fall protection systems such as fall arrest or fall restraint systems
3. Implementing safe and secure work practices such as keeping the working area clean and avoiding clutter
4. Inspecting the fall protect equipment and system before every use
5. Being prepared to rescue oneself and even assist others when the situation arises
6. Keeping equipment and tools away from the edges
   
   

Along With this there are Certain Precautionary Practices in Fall Protection Systems

1. The strength can be reduced by fifty perfect and when tied in lifelines and rope lanyards.
2. Lanyards or lifelines should not be tied directly to the I-beams.
3. Remembering the potential possibility of swing falls whenever connecting lifelines to the system of personal fall-arrest.
4. It is important to remember that there will be elongation of the lanyard which is shock-absorbing before the fall is arrested.
5. Horizontal lines should be made, installed and utilized only under the supervision of people who are qualified to do so.

There are a lot of construction workers who lost their life during their work. We need to secure them with all safety equipments and in this regard, we must contact with the reliable fall protection company.