Fall
arrest systems arrest the workers working on heights by stopping them
from hurting when falling from heights by capturing or arresting them in
the mid-fall. It is estimated that over 40000 workers fall on an annual
basis and get severely injured in the world. This is alarming and it is
increasing constantly. This a major risk to both the employers and the
workers. Eliminating all the potential hazards in workplaces or sites
employer tend to prevent falls. It is an ideal way or method of fall
prevention but that is not feasible everywhere as sometime workers work
on exterior sites. This is not the realistic solution for most
workplaces and therefore it is mandatory to install proper fall arrest
system as it is highly flexible and provides varied alternatives to
prevent fall and safe lives. As per the nature of the work and the
worksite, you can install barriers and guard rails in this system.
Training of workers is always necessary irrespective of the fall
protection system you use.
 |
| Fall Arrest Systems |
You may be wondering about the important components of fall arrest system.
They are equipped with the anchor, the harness, the layard, lifeline
components and others. These elements together secure a worker in the
mid-fall and land him to some secure work surface softly. Hence you can
prevent a harsh fall from a height. The energy of the fall is absorbed
by the fall arrest system mechanism thus protecting the person falling.
Effective Ways to Use Fall Arrest System to Save Many Lives
1. Make sure the fall arrest system is in proper working order at all times
All
the components of the fall arrest system should be properly inspected
on a regular basis. They must be in working order and should perform
their function quite well. Check the harness properly to find the
condition of straps and hardware. They must not be worn out. There
mustn’t be tear or twist in the fabric. All the parts should be easily
movable. Have a look at the rope of the lanyard that should be in good
condition. Check the harness attachment for that should be secure.
Again, check out the lifeline to find the signs of wear and tear. Check
for deterioration and make sure the retracting function is smooth. If
you notice the sign of wear and tear, replace that component instantly
and do not take any chances as this can cost someone their entire life.
2. Fall protection training is important for workers
If
your employees or workers work at greater heights, then you must train
them for that. Fall protection training is required as per the
provincial and state law and every firm operating in such circumstances
must adhere to such legalities. Fall protection training courses are
available and the workers must participate so they can take safe
decisions while working at heights. The course or training help teach
workers about the fall protection systems, the dynamics of fall, fall
arrest system component and equipment care, inspection and harness
fitting. These training programs are affordable and must be taken as a
necessary investment.
3. It is a cost effective way of preventing falls
Fall
arrest system is affordable and requires no ongoing maintenance. The
efficiency of the worker increases since he can work peacefully without
worrying about injury. You may order a system and then add certain
extensions to it.
 |
| Fall Arrest |
For
an all round workers’ protection and compliances of workplace safety
law in Australia, it is necessary to use fall arrest system for firms
working in heights or risk prone sites. Retractable lifeline is great
for workers who work on trucks and railcars. It is important to ensure the durability of the fall arrest system that should be corrosion resistant.
0 comments:
Post a Comment