Fiberglass
pools construction is a general option which is, generally, preferred
after plaster and concrete. These pools are also regarded as the big
shells which are included in large projects. The installation of fiberglass pool coatings is easy as well as a quick process.
 |
| Fiberglass Pool Coatings |
Types of Coating used on Fiberglass Pool
The fiberglass usually holds certain type of paints coatings. They are as the following:
- Gel coating: The gel coating is quite important on these types of pools for protection. This coating can be done by using any type of paint. If you want to repaint your pool, then you have to strip off the coating of fiberglass and have to replace it after the painting is done. Also, this coating will always be extremely clear. so you can make it thicker to prevent your pool from leaks and wear.
- Epoxy paints: If you want to change the color of the fiberglass by means of painting, then you will need epoxy paint. Usually, these paints are manufactured from the chemical compounds to add additional strength to fiberglass by hardening the waterproof layer. You can also use these paints to fix cracks or chips on the fiberglass.
- Multiple layers: To have a fiberglass pool with some special effects, you have to paint multiple layers on it before installation. And, if you want to repaint your pool which has several colors, then it will be a little difficult to match the perfect texture. So, in this case, it will be better to contact a professional to imitate the original texture of the pool in an excellent manner.
- Other paints: Apart
from the epoxy paints and gel coats, you should not use any other paint
as they will corrode quickly and there is a great chance that the paint
may peel off too. It may also have be harmful effects if dissolved in
water. Thus, it is better to use the paints which are particularly
designed for pools as well as fiberglass.
Steps to Repair Steps of Fiberglass Pool
If
your swimming pool is affixed to the fiberglass, and involves services
like fibreglass pool coatings, then you can save investment lot of money
by means of repairing. If the fiberglass is just inserted in the pool,
then take them out from the pool and consider doing the following
steps:
 |
| Swimming Pool |
- First, drain the water from your pool you may do so with the help of filter system or pump. You have to, however, ensure that the site of repair is some inches above the water line.
- Allow it to dry completely so as to perform the repair work. You can also make use of towel or hair drier to remove the remaining little water.
- Get ready with gloves on hands and mask on face. Also, have a dermal tool or electric drill along with the stone tip.
- With the help of a stone tip, grind the fiberglass crack throughout its length. Also, you have to remove the finish of fiberglass, which should be of almost two inches. After completing the grind, remove debris with a wet towel and you will find a dull appearance surrounding the crack which is the end result.
- Then apply fiberglass primer by covering four inches around the crack. Sometimes, the fiber may stain the skin or the fiberglass, so be careful while applying primer.
- Then take the bonding filler and fill the crack by applying gentle pressure. Immediately make a second pass to smoothen the surface. It needs about 30 minutes to dry completely. It may need some extra time if the weather is cool.
- Then sand down the site until it becomes uniform.
- Mix the gel coat and start applying it evenly around the site.
- Finally, polish the site with a buffing cloth.
0 comments:
Post a Comment